Buy Now Pay Later NO Interest 0% Same Day Delivery Available within KL/Klang Valley
RM748.00 RM850.00
Jim Dunlop MXR M82 Bass Envelope Filter Effect Pedal
Price RM748.00 RM850.00
Product SKU M82
Brand MXR
Availability 1
Quantity
Description
Highlight
  • Analog envelope filter
  • True Bypass
  • 9-volt operation or optional power supply

MXR® BASS ENVELOPE FILTER

M82

The Bass Envelope Filter delivers classic analog envelope filter sounds with separate Dry and Effect level controls to keep your low end intact.

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

 

  • Analog envelope filter
  • True Bypass
  • 9-volt operation or optional power supply

 

THE LONG STORY

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

 

CONTROLS

  1. DRY knob controls volume of unaffected signal
  2. FX knob controls volume of envelope filter signal
  3. DECAY knob sets envelope filter’s decay stop frequency
  4. Q knob controls intensity of effect
  5. SENS. knob adjusts the sensitivity of envelope filter to your attack
  6. FOOTSWITCH toggles effect on/bypass (blue LED indicates on

 

DIRECTIONS

  • Run a cable from your bass to the Bass Envelope Filter’s INPUT jack and run another cable from the Bass Envelope Filter’s OUTPUT jack to your amplifier.
  • Start with all controls at 12 o’clock.
  • Turn the effect on by depressing the footswitch.
  • Rotate the DRY knob clockwise to increase volume of unaffected signal or counterclockwise to decrease it. 
  • Rotate the DECAY knob clockwise to raise decay stop frequency or counterclockwise to lower it.
  • Rotate the Q knob clockwise to increase intensity of effect or counterclockwise to decrease it.
  • Rotate the SENS. knob clockwise to increase envelope filter’s sensitivity to your attack or counterclockwise to decrease it.

 

SPECIFICATIONS

  • Input Impedance 1 MΩ
  • Output Impedance 100 Ω 
  • Max Input Level* -15 dBV 
  • Max Output Level +8 dBV
  • Noise Floor* -94 dBV
  • Filter Sweep (fc) 76 Hz to 3.2 kHz
  • Sensitivity Range 46 dB
  • Max Sensitivity at 500 Hz 
  • fc = 3.2 kHz -23 dBV
  • fc = 100 kHz -39 dBV
  • Decay Stop Freq. 76 Hz to 1.3 kHz
  • Filter Gain at fc 
  • Q Min, fc = 76 Hz +8 dB
  • Q Max, fc = 76 Hz +18 dB
  • Q Min, fc = 3.2 kHz +8 dB
  • Q Max, fc = 3.2 kHz +26 dB
  • FX Range** -∞ to 0 dB
  • Dry Range -∞ to +6 dB
  • Bypass True Hardwire
  • Current Draw 6 mA
  • Power Supply 9 volts DC

 

 

 

 

 

 

 

 

 

 

Reviews (0)
view all
back
0
0 reviews
What's in the box

1 × Jim Dunlop MXR M82 Bass Envelope Filter Pedal

Facebook reviews