Buy Now Pay Later NO Interest 0% Same Day Delivery Available within KL/Klang Valley
RM748.00 RM850.00
Jim Dunlop MXR M238 Iso-Brick | Isolated Effect Pedal Power Supply | 10 Outputs (9V x6, 18V x2, 6V-15V x2)
Price RM748.00 RM850.00
Product SKU M238
Brand MXR
Availability Pre-Order
Description
Highlight
  • Pedalboard friendly,small, lightweight housing that's built like a tank
  • 10 outputs is fully isolated, eliminating gig-ending ground loop noise
  • Features power on/off and connection status LEDs.
  • 2x 9V @ 100mA 
  • 2x 9V @ 300mA
  • 2x 9V @ 450mA
  • 2x 18V @ 250mA 
  • 2x 6V - 15V @ 250mA
  • The two 6V - 15V variable outputs can be used to emulate voltage "sag" - a drained battery effect sought by many vintage tonechasers
  • Comes with 10x DC Cables
  • 18v Adapter included : ECB009 18-volt adapter
  • Please read through description for full info on this power supply features

MXR® ISO-BRICK™ POWER SUPPLY

 

The Iso-Brick Power Supply is small and light with tons of quiet, noise-free DC power on tap ready to run a wide range of pedal types without crowding or weighing down your pedalboard.

Each of the Iso-Brick Power Supply's 10 outputs is fully isolated, eliminating gig-ending ground loop noise. Whether analog or digital, positive or negative ground, this power box has you covered. The MXR team broke down these 10 outputs to accommodate a variety of voltage and current requirements: two 9V outputs at 100mA, two 9V outputs at 300mA, two 9V outputs at 450mA, two 18V outputs at 250mA, and two variable outputs adjustable from 6V to 15V at 250mA. The two variable outputs can be used to emulate voltage モsag,ヤa drained battery effect sought by many vintage tonechasers.

On top of all that, the Iso-Brick Power Supply comes in a small, lightweight housing that's built like a tank. Features power on/off and connection status LEDs. Put this little box on your pedalboard to make sure it runs reliably and quietly gig after gig.

 

  • Pedalboard friendly,small, lightweight housing that's built like a tank
  • 10 outputs is fully isolated, eliminating gig-ending ground loop noise
  • Features power on/off and connection status LEDs.
  • 2x 9V @ 100mA 
  • 2x 9V @ 300mA
  • 2x 9V @ 450mA
  • 2x 18V @ 250mA 
  • 2x 6V - 15V @ 250mA
  • The two 6V - 15V variable outputs can be used to emulate voltage "sag" - a drained battery effect sought by many vintage tonechasers
  • Comes with 10x DC Cables
  • 18v Adapter included : ECB009 18-volt adapter
  • Please read through description for full info on this power supply features

 

CONTROLS

  • RED LED indicates bad input power connection
  • WHITE LED indicates good input power connection
  • POWER outputs power up to 10 pedals
  • BLUE LEDs indicate good output power connection
  • VOLTAGE controls set voltage level of variable 6–15V power outputs
  • 18V @ 2000mA power input jack

 

SPECIFICATIONS

  • INPUT 18V @ 2 Amps
  • regulated supply (positive barrel 
  • negative center 5.5mm x 2.1mm plug)
  • OUTPUTS 6-15V @ 250mA (2)
  • 18V @ 250mA (2)
  • 9V @ 450mA (2)
  • 9V @ 300mA (2)
  • 9V @ 100mA (2)
  • (all positive barrel negative center 5.5mm x 2.1mm)

 

 

 

 

 

 

 

 

Reviews (0)
view all
back
0
0 reviews
What's in the box

1x Jim Dunlop MXR M238 Iso-Brick | Isolated Effect Pedal Power Supply | 10 Outputs (9V x6, 18V x2, 6V-15V x2)

Facebook reviews